PENGEMBANGAN METODE PENINGKATAN KUALITAS LIMBAH AGREGAT BATU APUNG SEBAGAI MATERIAL BETON STRUKTURAL

The Development of Quality Improvement of Purnice Waste Aggregate as Structural Concrete Materials

Authors

Suparjo Suparjo , Akmaluddin Akmaluddin , Zaedar Gazalba , Tety Handayani

Published:

2017-08-08

Issue:

Vol. 1 No. 2 (2014): SPEKTRUM SIPIL

Keywords:

Beton ringan, Batu apung, Faktor Air Semen, Kuat tekan

Articles

Downloads

How to Cite

Suparjo, S., Akmaluddin, A., Gazalba, Z., & Handayani, T. (2017). PENGEMBANGAN METODE PENINGKATAN KUALITAS LIMBAH AGREGAT BATU APUNG SEBAGAI MATERIAL BETON STRUKTURAL: The Development of Quality Improvement of Purnice Waste Aggregate as Structural Concrete Materials. Spektrum Sipil, 1(2), 169–178. Retrieved from https://spektrum.unram.ac.id/index.php/Spektrum/article/view/71

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Abstract

Beton ringan merupakan beton yang memakai agregat kasar ringan dan  pasir sebagai pengganti agregat halus dengan ketentuan tidak boleh melampaui berat isi maksimum beton 1850 kg/m3. Agregat kasar ringan dari batu apung mempunyai kekuatan yang rendah, dan sangat berpengaruh terhadap kekuatan beton ringan. Syarat agregat batu apung untuk dapat dipakai sebagai bahan penyusun beton ringan struktural, maka perlu dilakukan rekayasa terhadap agregatnya. Perbaikan kekuatan agregat batu apung dengan merekayasa agregat batu apung tersebut dengan memasukkan/injeksi pasta semen dalam pori-porinya menggunakan metode perendaman disertai dengan pemberian tekanan udara.

Penelitian dilakukan untuk mengetahui pengaruh penambahan pasta semen pada pori agregat batu apung dengan variasi faktor air semen (FAS) yaitu fas 0.50, 0.55,0.60, 0.65, 0.70, 0.75, dan 0.80 ditinjau terhadap ketahanan aus agregat, kuat tekan langsung agregat, dan kuat tekan beton dengan benda uji silinder. Benda uji  tekan agregat yaitu ukuran 5cm x 5cm x 5cm dan untuk kuat tekan beton benda uji berupa silinder beton dengan diameter 150 cm dan tinggi 300cm.

Hasil penelitian menunjukkan bahwa nilai tertinggi terjadi dengan konsisten pada fas 0.70 baik untuk ketahan aus agregat, kuat tekan agregat, dan kuat tekan silinder beton. Besar penurunan untuk uji keausan agregat dengan perendaman 15,09% dan 21,10% dengan pemberian tekanan udara terhadap agregat tanpa rekayasa.  Kenaikan uji tekan agergat, dan uji tekan silinder beton tertinggi dicapai pada perendaman dengan pemberian tekanan udara berturut-turut adalah 55,7 %;  dan 22,80%, dibandingkan dengan sebelum agregat direkayasa.

License

Copyright (c) 2017 Suparjo Suparjo, Akmaluddin Akmaluddin, Zaedar Gazalba, Tety Handayani

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

You are free to:

  • Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
  • Adapt — remix, transform, and build upon the material for any purpose, even commercially.

The licensor cannot revoke these freedoms as long as you follow the license terms.

Under the following terms:

  • Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  • No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.

No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

Most read articles by the same author(s)

1 2 > >> 

Similar Articles

1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.